January 21 reported that Apple is expected to launch a new generation of smart phone iPhone 7 in September 2016. The codebreaker Froom recently found "Li-Fi Capability" in the source code database storage area of ​​Apple's iOS 9.1 operating system. (support Li-Fi) words, and accordingly speculate that the new iPhone or support the transmission speed can be 100 times faster than Wi-Fi Li-Fi light source wireless transmission technology.
Li-Fi is regarded as a new generation of wireless transmission technology. Its working principle is to transmit data messages by quickly adjusting the light source signal that controls visible light. The receiving end receives data messages through the light sensing device and digitizes the data messages. Test results show that Li-Fi transmission speed is over 100 Gb/s, theoretically 224 Gb or even faster, and the speed is far more than 7 Gb per second for current Wi-Fi technology. It takes only a few seconds to download a high-definition movie. .
There is “fruit powder†expecting iPhone 7 to support Li-Fi. However, Li-Fi technology is still in the experimental stage. The visible light cannot be penetrated by walls, the device must be directly facing the receiver, the use range is only 3 meters, and only in the lighted room. Using such restrictions, the iPhone 7 has very little chance of supporting Li-Fi technology.
On the other hand, Apple, its main competitor, Microsoft, has recently applied for a new patent. Microsoft may add a new design to the future Surface tablet and laptop, which will allow the Surface Pen to charge the device through magnetic attraction. At present, the Surface Pen is required to use a AAA battery or a mercury battery, but it may be added to the charging base in the future so that the Surface Pen is attached to the edge of the device and a new power switch is provided on the side, and an indicator light is provided to let the user know the power status.
PCD Cutting Inserts
PCD cutting inserts are used to machining for cast iron, non-ferrous materials, high-temp alloys, hardend materials.
PCD turning inserts are widely used to replace cemented Carbide Inserts in the processing industry, especillay for cutting Alumimium alloy, copper and Non-Ferros metal. Although the unit price is higher than the traditional cemented carbide inserts, but performas is much more better than other carbide inserts, as it can greatly improve the processing efficiency and service life, ensure the workpiece surface processing accuracy, especially for mirror finishing. At the same time, some of the PCD turing inserts can be repaired several times, the cost of the PCD turning inserts are even lower than that of the carbide inserts.
product catagory
PRODUCT DETAIL:
PRODUCT EQUIPMENT:
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
About us:
We are specialize in manufacturing PCD diamond tools and Carbide tools.
Our major product include PCD Inserts , PCD Reamers , PCD End Mill, PCD Taps, Carbide Inserts, Carbide Drills, Carbide Reams, Taps etc.. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps, Carbide End Mill, Special Form Cutter and many more.
If you encounter problems such as high-speed, high precision requirements, low tool life and so on in the processing, you may contact us to recommend appropriate design for you, we can provide customization per your drawing. Looking forward to make a long business relationship with you.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
PCD Cutting Inserts,Cutting Insert,Diamond Turning Inserts,Insert Cutting Tool
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com