Tender No.: 070066-01SG
Tendering Agent: Jiangsu Dacheng Engineering Consulting Co., Ltd. Owner: Nanjing Pukou District Urban Construction Command Office Registration Deadline: 2009-06-12
Region: Jiangsu Industry: Transportation, Water Conservancy Bridge Construction, Electrical and Electronic Equipment
The construction project of the urban construction headquarters of the Pukou District of Nanjing City has been approved by the project approval department (the approval number of the project: Pufa Reformation (2006) No. 330). The financial resources required for the project are financed and have been implemented. The project examines the qualifications of bidders, and adopts the prequalification method to select qualified bidders to participate in the bidding.
1. Jiangsu Dacheng Engineering Consulting Co., Ltd. (tendering agency) is entrusted by the tenderee to be responsible for the tendering of the project.
2. Overview of the bidding project:
1. Name of the bidding section: Procurement and installation of road lamp for K0+000~K1+055 road construction of Haiyuan Road Project
2. Project location: Jiangpu Street, Pukou District, Nanjing
3. Project type: minor engineering
4. Construction content: municipal public works;
5, structure type: other
6, construction period requirements: 90 calendar days
7. Estimated price of the project contract: 120,000 yuan
8. Content of bidding: urban lighting project;
9. Description of unit project and bidding scope: street lamp procurement and installation
10. Project scale: light stand: 70 sets; lamps: 70 pieces.
Third, the qualification requirements for bidding:
1. Applicant qualification level and scope: Professional contracting city and road lighting project level 3 or above.
2. Project Manager Qualification Category and Level: Registered Construction Engineer Certificate Municipal Public Works Level 2 or above or Project Manager Certificate Level.
3. The name of the unit of the bid applicant must be the same as the name of the unit on the enterprise qualification certificate.
4. This tender does not accept joint bidding.
4. Method of bidding for registration and obtaining prequalification documents:
Applicants can apply for the “Introduction Letter†and the legal representative's power of attorney to the designated place. They can also register with the Nanjing Construction Engineering Information Network ().
The date of this announcement is the time for the designated location and online bidding: from June 5, 2009 to June 12, 2009, from 08:30 to 12:00, and from 02:00 to At 17:30, the registration will be accepted at Jiangsu Dacheng Engineering Consulting Co., Ltd. (Tendering Agency). The last day can be accepted at the Pukou Sub-center of Nanjing Construction Engineering Trading Center (2nd Floor, No. 1 Zhujiang Road, Jiangpu Street).
Bidder applicants may download the pre-qualification documents online or at the designated place registration office. The online announcements and pre-qualification documents have the same legal effect as the written notices and pre-qualification documents. If the announcement and prequalification documents published online are inconsistent with the contents of the written announcement and prequalification documents, the written version shall prevail.
V. Prequalification method:
1. The pre-qualification method for the bidding applicants shall be implemented in accordance with the provisions of Su Jianzhao (2006) No. 372 and relevant regulatory documents.
2. This project is subject to the mandatory conditions specified in the document of Su Jianzhao (2006) No. 372 as the necessary qualification for passing the examination.
The mandatory conditions are:
(1) The ability to independently conclude a contract;
(2) Not being ordered to suspend business. The bidding qualification is cancelled or the property is taken over. Freeze and bankruptcy;
(3) The enterprise has no problems such as fraudulent bidding or serious breach of contract and major engineering quality, safety production accidents, etc. It has been suspended by the relevant departments and is within the suspension period;
(4) Qualification category of the enterprise. The qualification level of the grade and project manager meets the requirements of the tender announcement;
(5) The important content in the prequalification application is not distorted or falsified;
(6) The company has safe production conditions and obtains a safety license;
(7) The project manager has no construction in progress, or although there are projects under construction, but all construction tasks within the scope of the contract are nearing the completion stage, and the application for completion acceptance has been submitted to the original contractor, and the original contractor agrees to participate in other projects. Bidding competition, and has already completed the sales procedures at the construction engineering trading center;
(8) Other conditions stipulated by laws and regulations.
3. Identify potential bidder methods:
(1) If the number of qualified applicants for prequalification is less than or equal to 9, the tenderee will invite all eligible applicants to participate in the bidding.
(2) If the number of qualified applicants for prequalification is greater than 9, the tenderee will invite all qualified applicants to participate in the bidding;
Sixth, other:
1. Bidders who have one of the following acts may not participate in the bidding of this project:
(1) The enterprise has been disqualified from bidding according to law in violation of laws and regulations, and the period is not full;
(2) The enterprise has been publicized by the relevant bidding administrative supervision department due to violations of laws and regulations and bad behaviors in the bidding activities;
2. The bid evaluation method for this project adopts: the lowest bid price method that has been reviewed;
3. The legal representative or his authorized client and construction engineer must present the original documents of the identity Card and the original engineer's certificate and the original labor contract signed with the bidding applicant and the social security agency with nearly 6 documents when submitting the prequalification application documents. The original of the pension insurance payment certificate paid by the applicant for the month (December 2008 to May 2009). If the tender applicant fails to provide the original of the qualification certificate or the original contract of the pension insurance payment certificate issued by the labor contract and the social security institution, the tenderee will not be able to present the original legal representative or his authorized client and the construction engineer when submitting the prequalification application documents. Refusal to accept the application documents for prequalification (the construction engineer or project manager is over 60 years old, and does not need to provide the original labor contract and the original payment certificate for pension insurance); the construction engineer who has already completed the retirement procedure must bring the labor and social security department to the nursing home. The original of the retirement certificate, the original ID card and the original engineer's certificate and the labor contract (if it is less than half a year after the retirement of the bidder, the social security payment certificate from December 2008 to one month before retirement shall be provided. If the non-bidders retire, the retirement period must be half a year and the labor contract signed with the bidder has expired for half a year. Pre-qualification; if the construction engineer is an active serviceman, the officer’s certificate and the original engineer’s certificate must be carried (the military age is full) 6 months, and the registration unit on the construction engineer's certificate, the unit on the military officer's card and the investment If the social security payment unit cannot be displayed in the certificate issued by the social security agency, the bidder shall separately declare on the certificate that the construction engineer is the employee of the unit, the identity card number of the construction engineer (can be handwritten) and the official seal of the bidder.
4. The maximum bid limit price will be announced in the bidding documents.
VII. Tenderer: Tenderee of Urban Construction Command Office of Pukou District, Nanjing Address: No. 1 Zhujiang Road, Jiangpu Street, Pukou District, Nanjing, China Tenderer: 211800
Contact person of the tenderer: Zhang Renzu Tenderee Telephone Tendering Agency: Jiangsu Dacheng Engineering Consulting Co., Ltd. Address: 3F-E, Yifa Technology Building, No. 228, Guangzhou Road, Nanjing, Jiangsu, China Post Code: 210000
Agency Contact: Wu Hua Agency Telephone Note: If you are bidding for the first time in Nanjing, please bring along the relevant information of the company to register the enterprise information first. The construction enterprise shall go to the Infrastructure Office of the Municipal Construction Committee of No. 185 Guangzhou Road for information registration, telephone, supervision, equipment and other enterprises to go to the Information Department of Construction Engineering Trading Center No. 183 Guangzhou Road for information registration and telephone; if the bidding deadline is Failure to register business information before may result in an inability to enter the market.
(Source: http://)
Pcb Pcba,Multilayer Pcb,Double-Sided Pcb ,Single-Sided Pcb
Electronics Manufacturing Services Co., Ltd. , http://www.nbbelectronics.com