LED light bar application range and installation method

Scope of application:
LED strips and LED strips are now widely used in furniture, automotive, advertising, lighting, shipbuilding and other industries.
installation method:
1 four-wire light bar is about 22mm wide, about 8mm thick, and weighs about 0.25kg/m (4m/kg)
2 four-wire light bar has four wires, three rows of lights (note that it is not four rows of lights ~ ~), each row of 1 meter 24 lights, 24 * 3 = 72. Since the power of each lamp bead is 0.05W, the power of the 72 bead bar is: 72*0.05=3.6W.
3 There is a "scissor" mark per meter, which can only be cut at the mark. If the mark is cut or cut, it will cause one meter to be off! Some will be biased because of the mark. It is best to look at the mark carefully before cutting. Position, cut off where there is no connection in the middle. Look carefully and you can see it.
4 Each light bar must be equipped with a special plug (plug with transformer); when connecting, be sure to remove the transparent plastic cover, then connect the test light and then cover. Do not connect directly with the cover, so it is easy to short circuit!
When the 5 light bar is installed, it is usually placed in the lamp socket, and it can be straightened. It can also be fixed with a string or a thin wire. For exterior or vertical installation, you need to buy a clip and a tail plug. The original clip is completely transparent. It is best to put waterproof glass glue on the tail plug and plug after installation, so that the waterproof performance is better.

For users in remote area where there is no grid or is in need of power storage, FORZATEC provides off-grid solar power station, also known as stand-alone PV system, with LiFePO4 power storage with maximum capacity up to 1MWh. Solar power arrays will product adequate electricity to charge the lithium batteries in the day time, and DC/AC smart-tied inverter will work at both in-grid and off-grid mode. It will power the AC load of household electrical appliances by converting the DC power stored in the battery, and at the same time, transmit the extra power to the grid which bring the plant owner renewable profit by selling electricity. Off-grid Solar Power System mainly are composed of PV Panel, PV inverter, lithium ion battery, frame works, and cable lines, which enables residents far from the grid to enjoy cheap and renewable energy supply throughout the year.

 

Solar Power Plant

Solar Power Plant, In-grid Solar Power System, Off Grid PV Power System ,Solar Energy System, PV Power Plant

FORZATEC CO., LIMITED , http://www.forzatec.com