In the lobby, the largest part of the hotel interior, the most crowded area. The lobby area can be divided into: entrance area, reception area, rest area, passage area and elevator waiting area, all of which need to be considered in lighting design. In the design process, it is necessary to consider the integrity of the light environment and maintain the consistency of the color temperature, but different areas should be combined with local illumination, and differentiated from each other by brightness contrast, and transition to each other. Make the overall light environment close, easy and relevant.
At this stage, some hotels in China that do not pay attention to lighting design will use curtains, greenery or decorations to block the sunlight outdoors. Indoors or nights use indoor lighting instead of natural light. And in order to highlight the luxury and style of the hotel, the light in the lobby is full of brilliance. This is a misunderstanding in lighting design. Lighting design can only simulate daylight effects and cannot be replaced. The transition between daylight and artificial lighting often creates a special comfortable light environment. During the daytime in the lobby of Shangri-La Hotel, Beijing, the large-area floor-to-ceiling windows are the main source of indoor light. Artificial lighting is only supplemented. Through the dimmable design, the transition between day and night is achieved. This design is well received by the owners.
The dimming system is an integral part of the lighting design in the hotel lobby. It can change the overall single light environment. The mood of the person will change because of the emotions, and the light can also show his expression. And the processing of the light environment is different in different time periods. During the day, with the supplement of daylight, the artificial lighting in the lobby can only be turned on by 20%; at 17:00-22:00 in the evening, when the lobby utilization rate is the highest, we can choose 70%-100% to turn on artificial lighting to create a lively and comfortable Atmosphere; after 22:00 in the middle of the night, most of the lighting can be turned off and the overall light environment dimmed, but the functional areas of the accent lighting, such as the reception area, are preserved. And the dimming system can reduce power consumption and extend the life of the light source. In the economic sense, the lighting design consultants save the owner a large cost.
1. Entrance area lighting design
The entrance to the lobby is mainly designed to meet the functional lighting needs. Considering the need to transition the indoor and outdoor light environment, the light source at the outdoor awning is 4000K energy-saving lamps, so the color temperature difference between indoor and outdoor light is not large, which makes people feel more comfortable when entering the lobby. Moreover, the color temperature is higher, which can expand the sense of visual space and improve the temperament at the entrance. Give a deep impression to the passing crowd. The indoor part after entering the door can reduce the color temperature to about 2800K, which can make the indoor light environment more intimate, comfortable and more secure.
2. Reception area lighting design
The color temperature of the reception area should be the same as that of the indoor entrance, which not only echoes the entrance, but more importantly, it is easier to give the guests a good impression by combining the warm service of the reception staff. At the same time, considering that the reception area is connected with the settlement center, the requirements for comparison are high for functional considerations. It is very bright in the overall lobby environment, which can also highlight the importance of this area.
3, rest area lighting design
In the rest area, the interior designer will deliberately integrate the creativity into this space. In order to make this popular area, remove the dull elements and add some unique elements, such as human elements and natural decorative elements. Here, the lighting design is not only the lighting design in the whole range, but also the choice of decorative lighting, local lighting processing, etc. In this area, we generally handle the darker, warm lighting, and the wonderful music makes the guests staying here get a cup of squat and rest. The choice of table lamps on the table must match the surrounding decoration environment, taking into account many factors, such as carpets, sofas, tables, and even walls and steps.
4, channel area and elevator waiting area lighting design
The connection of the various spaces in the hotel is generally divided by the passage, the stairs and several important parts of the waiting area, not only in the lobby, but also in the rooms, restaurants and so on. Usually we will make the channel sign brighter and place it in a more obvious position in the area.
For the above areas, the combination of functional and decorative lighting is adopted; the color temperature of the light source is 3000K, and the angle of the light is controlled. The wide light is used to illuminate the whole environment; some narrow angle lamps are used to focus on the key position. The way the stairs are handled is the area where the lighting designer is creative. The light is usually hidden in a hidden place to achieve the effect of light and stairs.
Taken together, the lobby is a very important area of ​​the hotel and is the area that is most impressed by the entrance to the hotel. The use of lighting design means to show the interior design more strongly will enhance the competitiveness of the hotel in the industry.
10 Inch Oval Table Bladeless Fan
10 Inch Oval Table Bladeless Fan,Oval Table Bladeless Fan,Cool Desk Fans,Bladeless Desk Fan
Bladeless Fan & Fan Heater Co., Ltd. , http://www.bladelessfan-manufacturer.com