Millet box adhering to the combination of ultra-low price + high configuration, has been favored by the majority of consumers, sales are also firmly at the top. Many people use, of course, will also find some small problems, but as an Internet set-top box, the connection is not on the same brick as wifi. Xiao Bian today shared with you some of the millet boxes that are not connected to wifi solutions.
method:
1. Check whether the router WIFI signal is normal. If the signal is too weak, it may not be connected to the network. And check if the wifi name and password connected to the millet box are correct.
2. Whether the router setting prohibits the network card address (MAC) of the millet box. We can go into the router system settings, turn off the access barring or add millet boxes to allow connected devices.
3. Check whether the gateway and DNS in the wireless network are normal. It is recommended that the millet box wifi be set to be automatically obtained. If you use manual access, you should fill in the IP address. Check if the DNS is correct.
4. Close the millet box and restart after 3 minutes to see if it can be connected.
5, check the millet box near the same frequency interference source, close all other wifi receiving interrupt and Bluetooth, wireless network card, unplug the induction cooker and other appliances may interfere with, and then try to restart the router and the box.
6, restore the factory settings. Method: Home → Applications → About → Restore Factory Settings.
7. If 6 is invalid, power off the millet box → press the + buttons simultaneously and do not release the remote controller to the box and power up the box. → Select 'Reboot System Now' → There are two systems to choose from. It's not OK for the Current Running system to go back to the original system and run it again.
Guangzhou Ehang Electronic Co., Ltd. , https://www.ehangmobile.com