Recently, Ronda Electronics has launched a new high-efficiency lamp with a height of 2.4 meters T8 LED. It uses the Ronda 5630 LED package with LM-80 quality certification. The luminous efficiency of the lamp is up to 110 lumens per watt, which will be provided to Japanese brands. client.
Longda Electronics said that the new 8-foot LED high-efficiency lamp that will be released this time can achieve a high efficiency of 110 lumens per watt, which is more than 40% higher than the traditional lamp efficiency. It can achieve quality requirements such as no bending and uniform illumination, breaking through the limitations of LED lamp in process, assembly and materials, and conforming to the traditional 8-foot T8 lamp replacement market in the Japanese market.
The new lamp has a lifespan of 40,000 hours, which is five times longer than the traditional fluorescent lamp. The lightweight design can greatly improve the safety. It is very suitable for commercial or public engineering lighting that requires long-time lighting, such as stores, warehouses, stations, tunnels, etc. Not only can it reduce the cost of maintenance engineering, but also meet the demands of energy saving, environmental protection and safety.
The LED energy-saving lamps have also been introduced into the T10 pipe diameter specifications, as well as two lamp holders, such as the GX16 and R1D. They will focus on the Japanese, Asia-Pacific and European markets, and Q2 is expected to begin shipping.
Longda Electronics said that the new 8-foot LED high-efficiency lamp that will be released this time can achieve a high efficiency of 110 lumens per watt, which is more than 40% higher than the traditional lamp efficiency. It can achieve quality requirements such as no bending and uniform illumination, breaking through the limitations of LED lamp in process, assembly and materials, and conforming to the traditional 8-foot T8 lamp replacement market in the Japanese market.
The new lamp has a lifespan of 40,000 hours, which is five times longer than the traditional fluorescent lamp. The lightweight design can greatly improve the safety. It is very suitable for commercial or public engineering lighting that requires long-time lighting, such as stores, warehouses, stations, tunnels, etc. Not only can it reduce the cost of maintenance engineering, but also meet the demands of energy saving, environmental protection and safety.
The LED energy-saving lamps have also been introduced into the T10 pipe diameter specifications, as well as two lamp holders, such as the GX16 and R1D. They will focus on the Japanese, Asia-Pacific and European markets, and Q2 is expected to begin shipping.
Euroblock, short for "European-style terminal block"; is a combination of a low-voltage disconnect (or pluggable) connector and terminal block commonly used for microphones and line-level audio signals , and for control signals such as RS-232 or RS-485. It is also known as the Phoenix connector and comes from a German Phoenix Electric Company, which was established in 1981 in Harrisburg, Pennsylvania, USA. Also known as "Plug-in Terminal Blocks" or "Two-Piece Terminal Blocks".
Eurostyle Terminal Blocks,Eurostyle Terminal Blocks High Temperature,Eurostyle Terminal Blocks Kit,Eurostyle Terminal Blocks Heat Resistant
Sichuan Xinlian electronic science and technology Company , https://www.sztmlch.com